DONALDSON-DAY 256HPW8 Pulse Jet Dust Collector with walk-in to filter bags. -- General data: 40,500 to 26,000 CFM @ 16.1 to 10.6 ACR (air-to-cloth ratio), 2,544 sq. ft. filter media using (256) 3" x 6" oval x 8' bags, singed polyester filter bags (non-woven micron-rated felt). -- "PowerFlo Cleaning System" allows a higher ACR, "Dura-Life" bag technology allows higher surface loading & pulse cleaning resulting in a two-to-three fold filter life (when changing bags due to pressure drop), Super-sonic nozzles' converging-diverging design produces an intermittent jet of powerful high volume 'induced' air for efficient bag cleaning. GOYER pulse valves. -- Fan/Motor: Two New York Blower PLR, Size 33, class IV air handling fans belt driven by (2) 75 HP 365T, TEFC 1775 RPM motors. Fan inlets are approx 37" dia.. Upward blast discharge. -- Includes: Lower Hopper, Powered Horizontal Auger/Rotary Air Lock with belt driven motor. Explosion Vents, side access filter bags, caged access ladder and , steel support structure. Pipe adaptor for blower to collector line and square to round adaptor on filter inlet. Fan exhaust stack. No return air was installed on prior application -- NOTES: One set of used but laundered filter bags (stored in boxes) are included. Explosion doors will have to be replaced. -- Shell dimensions approx 192" wide x 112" deep x 274" top to bottom of hopper (332" high (overall height) . Weight about 15,000 Lbs.

TORIT 460-IRD-20 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure dropSpecifications: -- 20 HP direct drive, floor mounted blower. -- Fan inlet 17". -- 7,000 CFM. -- Set of filter bags -- .Steel elbow from fan to collector. Motor starter NOT included.

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

DONALDSON TORIT ECB 1 Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-To-Cloth ratio with a 5 HP blower / motor. -- Cloth area 1,356 Sq. Ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning, motor starter, pulse control timer board and pressure gage. -- (6) Round Cartridge Filters - fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application. -- Installation , Operation, Maintenance Manuals included

DONALDSON TORIT ECB 1 Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-To-Cloth ratio with a 5 HP blower / motor. -- Cloth area 1,356 Sq. Ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning, motor starter, pulse control timer board and pressure gage. -- (6) Round Cartridge Filters - fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application.

TORIT PCO2-4 Baghouse Dust Collector (Cartridge)Specifications: -- Top-mounted 7.5 HP blower with 1,750 CFM. -- (4) Cartridge filters with controller for high and low set pressure to activate the pulse jet cleaning. -- Dust collected s single, heavy-duty barrel. -- Inlet size 14". -- Return air damper / muffler. -- Includes: Set of New cartridge filters.(Additional ducting available)